Reinforced aluminium foil
Rubber/Resin
Silicone coated paper release
Menu
Aluminium joining tape for roofing insulation, pipe wrapping, and duct work. It offers thermal insulation, a vapour barrier, heat reflection, and high adhesion, ideal for HVAC and insulation applications.
25mm x 50m = 40 Rolls / Carton
36mm x 50m = 24 Rolls / Carton
48mm x 50m = 20 Rolls / Carton
72mm x 50m = 12 Rolls / Carton
96mm x 50m = 8 Rolls / Carton
Custom slit available on request
Silver
Total Thickness
0.16mm without release liner
Tensile Strength (PSTC-131)
130 N/25mm
Elongation (PSTC-131)
22%
Adhesion to Steel (PSTC-101 Method A)
22 N/25mm
Sheer Adhesion (PSTC-107 Procedure G)
Greater than 24 hours
Water Vapour Transmission
Less than 0.1g/m2 per 24 hours
Storage
Cartons should be sealed and stored away from direct sunlight at temperatures between 15°C to 30°C
Reinforced aluminium foil
Rubber/Resin
Silicone coated paper release
Standard widths for most tape products are 18mm, 24mm, 36mm, 48mm, 72mm, 96mm and 144mm.
Custom slitting to your required width is available subject to consultation and approval with your local Danco® Sales Consultant.
DANCO self-adhesive tapes are successfully used in many fields of application to solve a variety of problems. Our catalogues give numerous examples as suggestions for your own requirements. Each DANCO tape has been developed for a specific application. However, experience shows that, even for the same application, requirements can differ from case to case. Therefore, we suggest that you conduct tests to ensure that the DANCO tape you have in mind is suitable for your particular application. Our technical department and sales consultants will be pleased to assist you. All information and advice is given in good faith based on practical experience, but without any guarantee.
100% New Zealand Owned & Operated
