Reinforced aluminium foil
Solvent acrylic adhesive
Silicone coated paper release liner
DAN882 is a reinforced aluminium foil tape designed for sealing, splicing and vapour barrier applications in HVAC ductwork and hot or cold water pipes. Its high mechanical strength, corrosion resistance and durable construction make it ideal for demanding insulation applications.
Suitable for pipe sealing splicing and heat insulation and vapour barrier of HVAC duct and cold/ hot water pipes, especially the pipe sealing in shipbuilding industry
25mm x 50m = 40 Rolls / Carton
36mm x 50m = 24 Rolls / Carton
48mm x 50m = 20 Rolls / Carton
72mm x 50m = 12 Rolls / Carton
96mm x 50m = 8 Rolls / Carton
Custom slit available
Bright Aluminium
Total Thickness
220μm without liner
Tensile Strength (PSTC-31)
≥80 N/10mm
Service Temperature
-20°C to +120°C
Application Temperature
+5°C to +40C
Elongation (PSTC-31)
≥2%
Storage
Cartons should be sealed and stored away from direct sunlight at temperatures between 15°C to 30°
Reinforced aluminium foil
Solvent acrylic adhesive
Silicone coated paper release liner
Standard widths for most tape products are 18mm, 24mm, 36mm, 48mm, 72mm, 96mm and 144mm.
Custom slitting to your required width is available subject to consultation and approval with your local Danco® Sales Consultant.
DANCO self-adhesive tapes are successfully used in many fields of application to solve a variety of problems. Our catalogues give numerous examples as suggestions for your own requirements. Each DANCO tape has been developed for a specific application. However, experience shows that, even for the same application, requirements can differ from case to case. Therefore, we suggest that you conduct tests to ensure that the DANCO tape you have in mind is suitable for your particular application. Our technical department and sales consultants will be pleased to assist you. All information and advice is given in good faith based on practical experience, but without any guarantee.