Embossed foil-PET
Solvent Acrylic
Release Liner
Menu
Multi-layered, cold-weather acrylic adhesive tape for insulation jacketing, offering moisture protection, thermal resistance, and a vapour barrier. Usable in temperatures from -30°C to 100°C.
50mm x 50m = 5 Rolls / Carton
72mm x 50m = 5 Rolls / Carton
600mm x 50m = 1 Roll / Carton
Custom slit available on request
Natural Aluminium
Embossed
Yes
Tensile Strength (PSTC-131 | ASTM D 3759)
300 N/25mm
Elongation (PSTC-131 / ASTM D 3759)
25%
Service Temperature
-30°C to 100°C (-22°F to 212°F)
Backing Thickness (PSTC-133 / ASTM D 3652)
140 Micron (5.6.0Mil)
Total Thickness (PSTC-133 / ASTM D 3652)
190 Micron (7.6Mil)
Adhesion to Steel (PSTC-101 / ASTM D 3330)
20 N/25mm
Track Rolling Ball (PSTC-6 / ASTM D 3121)
5cm
Permeance WVTR (ASTM E96 / Procedure)
0 ng/N.s (0 perm)
Storage
Cartons should be sealed and stored away from direct sunlight at temperatures between 15°C to 30°C
Embossed foil-PET
Solvent Acrylic
Release Liner
Standard widths for most tape products are 18mm, 24mm, 36mm, 48mm, 72mm, 96mm and 144mm.
Custom slitting to your required width is available subject to consultation and approval with your local Danco® Sales Consultant.
DANCO self-adhesive tapes are successfully used in many fields of application to solve a variety of problems. Our catalogues give numerous examples as suggestions for your own requirements. Each DANCO tape has been developed for a specific application. However, experience shows that, even for the same application, requirements can differ from case to case. Therefore, we suggest that you conduct tests to ensure that the DANCO tape you have in mind is suitable for your particular application. Our technical department and sales consultants will be pleased to assist you. All information and advice is given in good faith based on practical experience, but without any guarantee.
100% New Zealand Owned & Operated
