Low density closed cell PVC foam
Acrylic
Paper
Menu
Low-density closed-cell PVC foam tape for general-purpose applications, providing seals on irregular surfaces, vibration absorption, and insulation with excellent weather resistance.
6mm / 9mm / 12mm / 18mm / 24mm
Custom slit available on request
Black
Density
112kg/m3
Tensile Strength (ASTM D412)
173 kPa
Elongation (ASTM D412)
150%
Hardness – Shore 00(ASTM D2240)
14
Compression Deflection @ 25% (ASTM D1667)
6 kPa
Compression Set @ 50% (ASTM D1667)
4% loss from original height
Water Absorption
1.1%
Thermal Conductivity (K factor)(ASTM C518)
0.039 W/m K
Service Temperature
-40°C to +80°C
Application Temperature
+10°C to +43°C
Thicknesses Available
3.2mm / 4.8mm / 6.4mm / 9.0mm / 12.7mm / 19.0mm
Storage
Cartons should be sealed and stored away from direct sunlight at temperatures between 15°C to 30°C
Low density closed cell PVC foam
Acrylic
Paper
Standard widths for most tape products are 18mm, 24mm, 36mm, 48mm, 72mm, 96mm and 144mm.
Custom slitting to your required width is available subject to consultation and approval with your local Danco® Sales Consultant.
DANCO self-adhesive tapes are successfully used in many fields of application to solve a variety of problems. Our catalogues give numerous examples as suggestions for your own requirements. Each DANCO tape has been developed for a specific application. However, experience shows that, even for the same application, requirements can differ from case to case. Therefore, we suggest that you conduct tests to ensure that the DANCO tape you have in mind is suitable for your particular application. Our technical department and sales consultants will be pleased to assist you. All information and advice is given in good faith based on practical experience, but without any guarantee.
100% New Zealand Owned & Operated
